Manufacture of transportable fuel tanks, diesel fuel dispensers, containers for fuel transport, tank for fuel transport
|
|
|
|
Article: |
 |
| TRASPO ® |
 |
| Description: |
|
|
Tank for fuel transport
To solve the fuel transport problem, Emiliana Serbatoi has designed and produced TRASPO ® container line, type-approved by the Ministry of Transport and compliant with the ADR/label standards and UN marked.
TRASPO ® containers are built with carbon steel, tight welded and are externally protected by a wire cage.
Horizontal (Mod. 380-620-910) and vertical (Mod. 250-450) cylinder axis tanks, assembled inside a shock proof and anti-roll protective casing.
They are electrostatically powder coated in a furnace, after undergoing a blasting treatment, and then supplied with inside wave break bulkheads (only for 620 and 910 models).
Ø 300 mm hermetically sealed upper lock chamber with plate and a 10 mm thickness counter flange, bolts and gaskets. Ø 2" safety valve according to law.
Double flange and dshut-off ball valve suction. Plates for balanced lifting from the top, including when fully loaded. Side holes for truck forks fitting and base holes for anchorage to the platform, when applicable.
Ready for earthing and equipotential connection.
TRASPO ® can be provided with an output unit located in a furnace coated metal cabinet, key lockable, created according to the customer’s requirements. |
 |
|
|
| Tank models for fuel transport: |
|
|
TFT 250
(type approved by the Ministry of
Transport)
TFT 380
(type approved by the Ministry of
Transport)
TFT 450
type approved by the Ministry of
Transport)
TFT 620
(type approved by the Ministry of
Transport)
TFT 910
(type approved by the Ministry of
Transport)
Certificates supplied with containers:
- Commissioning/Initial inspection certificate, issued by a Licensed Body
- EC Declaration of Conformity for the transfer
unit
- Instruction booklet for road use according to ADR prescriptions and
for correct use of transfer units.
|
|
| Technical data and installation: |
|
|
Nominal capacity: 250 - 380 - 450
- 620 - 910
Maximum filling point: 94 - 98% of the actual geometric capacity, according to the characteristics of the fluid and environmental conditions.
Output electric units 12 or 24 V c.c.
Electropump with a capacity of 40 or 60 l./min., with by-pass device included
Manual or automatic stop gun
Carbopress rubber pipe 5 m
Liter counter for private use
|
|
|
|
|
|
|
|
|
|
| |
|
