Manufacture of fuel storage tanks, tanks for transport and stock of diesel, gasoline and lubricant oil
|
|
|
|
 Article: |
 |
| GE Tank |
 |
| Description: |
|
|
Fuel storage and refilling tanks for generating sets and heating systems.
Manufactured in compliance with 1391 DPR of 22 December 1970 and according to what is requested in n. 73 circular letter of 29 July1971 by the Ministry of the Interior.
They have a horizontal cylinder axle on roll-proof supporting feet. They are made of carbon steel sheet treated with a rustproof layer and a green finishing coat and are provided with an impounding basin.
Supplied with:
- 400 mm Ø manhole with bolts and gaskets, 3" ring nut with quick coupling, with load limiting valve reducing the tank geometric capacity to 90%. Shut-off vent. Level indicator visible from the outside, with inside protection pipe for the float. 1" 2 suction and return sockets. Suction pipe with 1" foot valve
- Bottom outlet for any regular cleaning with safety cap. Ready for earthing and equipotential connection.
CONTAINMENT BASIN
Made in carbon steel sheet with reverse U - shaped top edge, self-supporting bottom frame already bolted at the tank bottom, suitable for being placed on any type of ground (even for permanent placing).
Basin Capacity: At least 50% or 100% of
geometric tank capacity.
It is supplied with lifting plates, earthing connection and socket with drain plug, 4 potting compounds suitable to lock roofing column, integrally treated with a rustproof layer and a green enamel finishing coat layer. |
|
|
|
| Technical Data: |
|
|
Capacity: 490, 1300, 2400, 3000,
5000, 7000 and 9000 lt.
Certificates attached:
- Test certificate
- Calibration table
|
|
|
|
|
|
|
|
|
| |
|
