DEVIL 40

DC Fuel Transfer Pumps

Displacement, self-priming, rotary electric vane pumps for the transfer of diesel fuel equipped with by-pass valve.

Powerful, dependable and economical, they are available with 12 and 24-volt direct current motors.

Thanks to their compact size, ease of installation, dependability and safety, these pumps are used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.

Technical Specifications

Cast iron pump body finished with anti-corrosion paint.
Vane pump with sintered steel rotor and acetal resin vanes.
By-pass valve incorporated in the pump body.
Direct current brush motor with permanent magnet stator.
Motor protection grade IP55.
Used in intermittent service with 30-minute work cycles.
Pump attachment support bracket.

Model DEVIL 40 whit parallel inlet / outlet 360°: (Images 1-2-3-4)
Available in two versions (12 and 24-Volt) with 3/4" threaded connectors on the pump body.
Flow rate: 40 l/min (12V version) and 43 l/min ( 24V version).

Model DEVIL 40 whit opposite inlet / outlet 180°: (Images 5-6-7)
Available in two versions (12 and 24-Volt) with 3/4" threaded connectors on the pump body.
Flow rate: 40 l/min (12V version) and 43 l/min ( 24V version).

Find out more

Request information

Brochure

Gallery

description

Cast iron pump body finished with anti-corrosion paint.
Vane pump with sintered steel rotor and acetal resin vanes.
By-pass valve incorporated in the pump body.
Direct current brush motor with permanent magnet stator.
Motor protection grade IP55.
Used in intermittent service with 30-minute work cycles.
Pump attachment support bracket.

The specifications may differ from areas and we keep the right to change without notice. Please check the specification with your local dealers. The colour of the product might be affected by photography and the monitor's setting, which might be different from the real product.