Generator steel tanks - United Nations

Horizontal cylindrical tanks, manufactured by using shell plates and dished ends and in accordance with the European Standard UNI EN 12285.2 – Class A “Horizontal Cylindrical Single Skin And Double Skin Tanks For The Aboveground Storage of Flammable And Non-flammable Water Polluting Liquids”.

Project: United Nations
Destination: Darfur, Sudan
Quantity: n. 213 tanks

Main Features:

Capacities: sizes ranging from 1000 to 20,000 Litres.
Tanks are butt-welded in accordance with EN 12285-2 , with EN 287-1 “approval testing of welders” and with EN 288 “specifications and qualification of welding procedures for metallic materials.
Material: carbon steel Grade DC01 according to UNI EN 10130.
Tanks are provided with steel supports or saddles, designed and manufactured in accordance with Standard EN 12285-2.
460 mm diameter ingress manhole with tight and bolted cover located in the middle, on top of tank; the manhole cover will be provided with a oil-resistant gasket.
Dip stick gauge access port with weather proof cap made in gunmetal material.
Aluminium dip stick calibrated gauge to determinate manually the fuel level.
4” filling pipe, complete with lockable cap and chain in gunmetal or aluminium.
1” spill return pipe, complete with cap.
4” drain screw-down gate lockable valve made in gunmetal. Drain valve will be provided with a cap.
2” outlet screw-down gate lockable valve made in gunmetal. Outlet valve will be provided with a cap.
4” weather-proof vent pipe with pressure/vacuum breather valve and flame arrestor device;
All piping, fittings, couplings, gaskets, flanges, valves are certified about compatibility with Diesel Fuel.
Tanks are delivered tested (pressure test at 1,5 bar for 2 hours) and ready for installation.
Tanks and piping are sandblasted at sa2,5 grade (according with ISO EN 8501-1), primed and painted with two-part of epoxy white paint.

Find out more

Request information

Gallery

description

Capacities: sizes ranging from 1000 to 20,000 Litres.
Tanks are butt-welded in accordance with EN 12285-2 , with EN 287-1 “approval testing of welders” and with EN 288 “specifications and qualification of welding procedures for metallic materials.
Material: carbon steel Grade DC01 according to UNI EN 10130.
Tanks are provided with steel supports or saddles, designed and manufactured in accordance with Standard EN 12285-2.
460 mm diameter ingress manhole with tight and bolted cover located in the middle, on top of tank; the manhole cover will be provided with a oil-resistant gasket.
Dip stick gauge access port with weather proof cap made in gunmetal material.
Aluminium dip stick calibrated gauge to determinate manually the fuel level.
4” filling pipe, complete with lockable cap and chain in gunmetal or aluminium.
1” spill return pipe, complete with cap.
4” drain screw-down gate lockable valve made in gunmetal. Drain valve will be provided with a cap.
2” outlet screw-down gate lockable valve made in gunmetal. Outlet valve will be provided with a cap.
4” weather-proof vent pipe with pressure/vacuum breather valve and flame arrestor device;
All piping, fittings, couplings, gaskets, flanges, valves are certified about compatibility with Diesel Fuel.
Tanks are delivered tested (pressure test at 1,5 bar for 2 hours) and ready for installation.
Tanks and piping are sandblasted at sa2,5 grade (according with ISO EN 8501-1), primed and painted with two-part of epoxy white paint.

The specifications may differ from areas and we keep the right to change without notice. Please check the specification with your local dealers. The colour of the product might be affected by photography and the monitor's setting, which might be different from the real product.